Pro Displays: What is Color Calibration and how do I use it?
Color (or Colour) Calibration is a function available on high brightness / professional display projectors.
This function is part of the ongoing image maintenance for this projector series, its function is to automatically adjusts aging deterioration of the color tone for the whole screen based on the default color settings.
It is particularly important to note that image deterioration is normal over time and use of a projector, this function enables the user to quickly improve any color tone image quality.
Operating Conditions for auto adjustment functions
The auto adjustment function for Color Calibration works under the following conditions:
The screen surface is flat and not skewed or warped.
Using a matte white diffusion screen.
The projection size is 80 to 200 inches.
The projector is setup parallel to the projection surface.
Auto adjustment is not available when using the following lenses. ELPLX01, ELPLX02, ELPLR04, ELPLL08, ELPLL07
After auto adjustment, the movement range for lens shift is reduced for some lenses.
We recommend performing Color Calibration 30 minutes after turning on the projector or canceling A/V mute.
We recommend that the sleep timer is switched off, as this will reduce brightness when the projector is not in use and therefore impair the results or fail the color calibration.
To increase the accuracy of adjustments, we recommend darkening the room while projecting images and then making adjustments.
Auto adjustment is performed using the camera built into the front of the projector. Do not block the camera or the projected images.
Auto adjustment takes approximately one minute and 30 seconds.
After making automatic adjustments, Color Uniformity and Color Matching are returned to their defaults.
Performing Color Calibration
The adjustment pattern is displayed, and the adjustment sequence starts. Once the color calibration sequence has been completed succesfully, it will return to the original source image.
Press the [Menu] button while projecting.
Select Color Calibration from the Extended menu.
Select Start Auto Adjustment, and then start the Color Calibration function
To return to the status before auto adjustment, select Undo.
When you select Redo after selecting Undo, it returns the image to the status after the auto adjustment.
To return Color Calibration adjustment value to its default value, select Reset.
Scheduling Color Calibration
For fixed installations, it is recommended that the color calibration function is carried out as part of a schedule, the frequency can be set depending on the operating time of the projector. For example, if the projector is projecting 8 hours a day, set the schedule function to perform the calibration every evening after that 8 hour period.
Press the [Menu] button while projecting.
Select Schedule Settings from the Extended menu
Select Add New from the Extended Schedule.
Select the Color Calibration operation.
Set the date, day of the week, and the time to execute the event. You can set up to four weeks of schedules.
Select Save, and then press the Enter button the remote.
Select Setup Complete, and then select Yes to complete the schedule setup.
Troubleshooting - Auto Adjustment Failed Errors
In the event that the auto color calibration function has failed, please ensure that you are meeting the specifications mentioned previously in this article, or follow the steps below.
Have at least 20 minutes passed since the power was turned on?
Auto adjustment does not work correctly until the temperature of the projector is stable. Perform auto adjustment 20 minutes after turning on the projector or canceling A/V Mute.
Does the Lens Type selected and the lens installed match?
When using the following lenses, check that the Lens Type and the lens being used match. If a different lens is selected, auto adjustment does not work correctly.
ELPLS04, ELPLU02, ELPLW04, ELPLM06, ELPLM07
Extended - Operation - Advanced - Lens Type
Is the cover of the built-in camera clean?
Make sure that the cover of the built-in camera is clean. Clean the cover if it is dirty and ensure that the camera can see the full projected image.
Is an analog signal being input?
When an analog signal is input, the color and brightness of the image changes, and the result of adjustment may not be applied correctly.
Has the image been corrected usign Geometry Correction?
Auto adjustment may not work for images corrected using Geometry Correction. Set Geometry Correction to Off or reduce the correction range.
Is the brightness of the surroundings appropriate?
If a powerful spotlight or natural ambient light shines into the area during auto adjustment, the brightness of the surroundings changes and auto adjustment does not operate correctly. Make sure the brightness of the surroundings does not change.
Is Multi-projection Edge blending in use?
Color Calibration is when you are calibrating a single projector, when using Edge blending with multiple projectors, use the Screen Matching function.
Is the message "An error occurred during auto adjustment." displayed?
There are three main error code displayed when the above message appears:
Measurement value error 0201: Certain color values read by the camera are unknown or out of bounds/specification.
Measurement failure 0202: The projector camera was unable to read the color patterns.
Switch camera failure 0203: The projector has two cameras, this error can occur if it was unable to switch between the two cameras during the color calibration measurement.
Troubleshooting steps for each of the three main errors include what has been previously mentioned in this article e.g. cleaning the camera, ensuring image size is correct...
Usamos cookies no nosso website. Ao continuar a navegar no nosso website, está a concordar com o uso de cookies. Para obter mais informações sobre o uso de cookies e como gerir as suas preferências, consulte Informações sobre cookies